
SealsHub supplies a 37 x 25 mm black EPDM solar panel gap sealing T-profile for photovoltaic mounting assemblies with compatible gap widths of approximately 18–20 mm. Its 37 mm wide top flange provides coverage across the joint, while the hollow barbed stem supports push-in installation and mechanical retention within compatible mounting openings.
With an approximate wall thickness of 2 mm, the EPDM profile combines structural flexibility with a defined sealing section for PV mounting applications. Its material properties offer resistance to ozone, moisture and outdoor weathering.
SealsHub supports OEM manufacturing, custom profile development and bulk supply for solar mounting manufacturers, distributors and project buyers. Explore our EPDM Solar Panel Sealing Strips for additional profile dimensions and designs.
• T-Shaped Sealing Profile: The 37 mm top flange covers compatible gaps in photovoltaic mounting assemblies.
• Hollow Barbed Stem: The stem structure helps engage the opening and maintain a fitted position.
• 18–20 mm Gap Compatibility: Designed for compatible gaps within this approximate width range.
• EPDM Rubber Material: Provides flexibility and resistance to ozone and outdoor weather exposure.
• Approx. 2 mm Wall Thickness: Offers a defined profile construction for solar sealing applications.
• OEM and Bulk Supply: Supports custom production and volume requirements for commercial projects.
| Item | Details |
|---|---|
| Product Type | Solar Panel Gap Sealing T-Profile |
| Profile Dimensions (W x H) | 37 x 25 mm |
| Material | EPDM Rubber |
| Wall Thickness | Approx. 2 mm |
| Stem Structure | Hollow Barbed Stem |
| Installation Type | Push-In / Press-Fit |
| Compatible Gap Width | Approx. 18–20 mm |
| Color | Black |
| Supply Form | Roll / Coil |
• Photovoltaic Mounting Rails: Sealing interfaces in compatible channel-based rail assemblies.
• Solar Panel Support Structures: Gap sealing within PV mounting frameworks.
• Outdoor PV Installations: Use in photovoltaic mounting assemblies exposed to environmental conditions.
• Solar Mounting Equipment Manufacturing: Component sourcing for manufacturers, distributors and installation contractors.
Align the hollow barbed stem with the compatible opening and press the profile evenly into place along its length. Check that the stem is properly engaged and the top flange sits evenly against the intended surface. Confirm the opening width, internal geometry and required insertion depth before installation. For non-standard mounting designs, sample fitting is recommended to verify compatibility and retention before bulk ordering.
Custom colors, lengths and profiles available upon request.
Q: What gap width is this T-profile designed for?
A: It is designed for compatible gap widths of approximately 18–20 mm. Actual fit depends on the opening's internal dimensions and geometry.
Q: How is this EPDM T-profile installed?
A: It uses a push-in fitting method. Align the hollow barbed stem with the opening and press it evenly into place.
Q: Does this profile require adhesive backing?
A: No. It is designed for mechanical push-in installation without standard adhesive backing.
Q: Can I test a sample before placing a bulk order?
A: Yes. SealsHub recommends checking a sample against your mounting opening to confirm fit and retention.
Q: Does SealsHub offer OEM manufacturing?
A: Yes. OEM production, custom profile development and bulk supply are available upon request.
Explore other SealsHub EPDM solar panel gap sealing T-profiles with hollow barbed stems in different sizes and gap ranges.
{{commentStat.total}} Revirews

{{item.comments}}