
SealsHub supplies a 27 x 23 mm S Type EPDM Glazing Seal Profile for metal-to-glass assemblies using 2–3 mm metal panels and 4–6 mm glass. Its S-shaped cross-section provides separate retaining sections for the panel and glass, while the reinforced center support helps maintain profile stability between the two components.
Made from EPDM rubber, this profile provides elastic contact and edge cushioning in suitable industrial assemblies. Potential applications include electrical enclosures, machinery inspection windows, equipment housings, and fixed viewing panels where the specified panel and glass dimensions match the profile geometry.
This size is part of SealsHub's S Type EPDM Glazing Seal Profile range, available in different profile dimensions for varying panel thicknesses, glazing requirements, and installation configurations.
Key Features
| Item | Details |
|---|---|
| Product Type | Glazing Seal Profile |
| Material | EPDM Rubber |
| Profile Size (W × H) | 27 x 23 mm |
| Metal Panel Thickness | 2–3 mm |
| Glass Thickness | 4–6 mm |
| Color | Black |
| Profile Shape | S Type |
| Installation | Push-on |
Application suitability depends on the profile cross-section, retaining geometry, component thicknesses, and assembly requirements.
1. Prepare the mating edges. Clean the metal panel and glass edges, removing burrs, sharp projections, and contamination before fitting.
2. Fit the profile to the metal panel. Position the profile along the designated panel edge and press it progressively into place.
3. Install the glass. Insert the glass into its corresponding retaining section, following the actual profile cross-section and intended assembly sequence.
4. Inspect the finished assembly. Check that both components are correctly seated and that the profile remains aligned along the required length. Cut the profile cleanly to the required length where applicable.
Verify fit and retention using the actual profile and mating components before full-scale installation.
Custom colors, lengths and profiles available upon request.
SealsHub can also support custom profile development and OEM requirements based on drawings, samples, dimensions or application requirements.
Q: What metal panel thickness does this profile fit?
A: It is designed for 2–3 mm metal panels. Confirm the fit against the actual profile cross-section before ordering.
Q: What glass thickness can this profile accommodate?
A: The glazing section is specified for 4–6 mm glass. Actual retention depends on the profile geometry and glass dimensions.
Q: What is the function of the reinforced center support?
A: It helps maintain the profile's shape and stability between the metal panel and glass retaining sections.
Q: What material and color are available for this profile?
A: This size is made from EPDM rubber and supplied in black.
Q: Are other S Type EPDM glazing profiles available?
A: Yes. SealsHub supplies S Type EPDM Glazing Seal Profiles in different dimensions for varying panel thicknesses, glass sizes, and installation requirements.
Explore other SealsHub S Type EPDM Glazing Seal Profiles in different dimensions for varying panel thicknesses, glazing requirements, and installation conditions.
{{commentStat.total}} Revirews

{{item.comments}}