
SealsHub supplies a 20 x 20 mm translucent H type silicone rubber connector gasket designed for joining compatible panels or glass components from opposite sides. The profile is intended for panels approximately 14 mm thick and features an off-center 3 mm central connecting section.
The offset layout creates different insertion depths on the two sides: 10 mm on one side and approximately 7 mm on the other. This asymmetrical configuration is suited to assemblies where the two panel edges require different engagement depths within the same connector profile. The translucent silicone rubber provides a flexible interface for suitable panel joining and sealing applications.
Confirm the panel fit, insertion orientation and actual cross-sectional dimensions before ordering.
| Item | Details |
|---|---|
| Product Type | Connector Gasket |
| Profile Dimensions (W x H) | 20 x 20 mm |
| Profile Shape | Offset H Type |
| Material | Silicone Rubber |
| Color | Translucent |
| Compatible Panel Thickness | Approx. 14 mm |
| Central Section Width | 3 mm, offset from center |
| Wall Thickness | Approx. 3 mm |
| Panel Insertion Depth, Side 1 | 10 mm |
| Panel Insertion Depth, Side 2 | Approx. 7 mm |
| Supply Form | Roll / Coil |
Check the actual panel thickness and profile dimensions before installation. Identify the side with a 10 mm insertion depth and the opposite side with an approximately 7 mm insertion depth, then orient the profile to match the intended assembly. Insert each panel edge into its corresponding channel without excessive stretching, twisting or compression.
Verify that both panels are properly seated and that the finished assembly provides the required contact and sealing. Confirm the actual fit against the supplied profile before production installation.
Custom colors, lengths and profiles available upon request.
For OEM or custom requirements, provide the panel thickness, profile dimensions, required insertion depths, quantity and application details, together with drawings or samples where available, for review and quotation.
Q: What panel thickness is it designed for?
A: It is intended for compatible panels approximately 14 mm thick. Confirm the actual fit before installation.
Q: Why are the insertion depths different on the two sides?
A: The 3 mm central connecting section is positioned off-center, creating a 10 mm insertion depth on one side and an approximately 7 mm depth on the other.
Q: Can this profile be customized?
A: Custom colors, lengths and profiles available upon request.
Q: How can I request a quotation?
A: Send SealsHub the required quantity, panel thickness, application details and any available drawings or samples for review and quotation.
Explore other SealsHub H type silicone rubber connector gaskets in different dimensions and configurations.
{{commentStat.total}} Revirews

{{item.comments}}